NWP_Query Object ( [query] => Array ( [post_type] => kb [post__not_in] => Array ( [0] => 36862 ) [tax_query] => Array ( [0] => Array ( [taxonomy] => kbtopic [field] => slug [terms] => wiring-diagrams-chimecom-series ) ) [posts_per_page] => 4 [orderby] => rand ) [query_vars] => Array ( [post_type] => kb [post__not_in] => Array ( [0] => 36862 ) [tax_query] => Array ( [0] => Array ( [taxonomy] => kbtopic [field] => slug [terms] => wiring-diagrams-chimecom-series ) ) [posts_per_page] => 4 [orderby] => meta_value_num menu_order [error] => [m] => [p] => 0 [post_parent] => [subpost] => [subpost_id] => [attachment] => [attachment_id] => 0 [name] => [pagename] => [page_id] => 0 [second] => [minute] => [hour] => [day] => 0 [monthnum] => 0 [year] => 0 [w] => 0 [category_name] => [tag] => [cat] => [tag_id] => [author] => [author_name] => [feed] => [tb] => [paged] => 0 [meta_key] => [meta_value] => [preview] => [s] => [sentence] => [title] => [fields] => [menu_order] => [embed] => [category__in] => Array ( ) [category__not_in] => Array ( ) [category__and] => Array ( ) [post__in] => Array ( ) [post_name__in] => Array ( ) [tag__in] => Array ( ) [tag__not_in] => Array ( ) [tag__and] => Array ( ) [tag_slug__in] => Array ( ) [tag_slug__and] => Array ( ) [post_parent__in] => Array ( ) [post_parent__not_in] => Array ( ) [author__in] => Array ( ) [author__not_in] => Array ( ) [search_columns] => Array ( ) [meta_query] => Array ( [relation] => OR [0] => Array ( [key] => mkb_tax_order_5747 [compare] => EXISTS ) [1] => Array ( [key] => mkb_tax_order_5747 [compare] => NOT EXISTS ) ) [order] => ASC [ignore_sticky_posts] => [suppress_filters] => [cache_results] => 1 [update_post_term_cache] => 1 [update_menu_item_cache] => [lazy_load_term_meta] => 1 [update_post_meta_cache] => 1 [nopaging] => [comments_per_page] => 50 [no_found_rows] => [taxonomy] => kbtopic [term] => wiring-diagrams-chimecom-series ) [tax_query] => WP_Tax_Query Object ( [queries] => Array ( [0] => Array ( [taxonomy] => kbtopic [terms] => Array ( [0] => wiring-diagrams-chimecom-series ) [field] => slug [operator] => IN [include_children] => 1 ) ) [relation] => AND [table_aliases:protected] => Array ( [0] => wp_term_relationships ) [queried_terms] => Array ( [kbtopic] => Array ( [terms] => Array ( [0] => wiring-diagrams-chimecom-series ) [field] => slug ) ) [primary_table] => wp_posts [primary_id_column] => ID ) [meta_query] => WP_Meta_Query Object ( [queries] => Array ( [0] => Array ( [key] => mkb_tax_order_5747 [compare] => EXISTS ) [1] => Array ( [key] => mkb_tax_order_5747 [compare] => NOT EXISTS ) [relation] => OR ) [relation] => OR [meta_table] => wp_postmeta [meta_id_column] => post_id [primary_table] => wp_posts [primary_id_column] => ID [table_aliases:protected] => Array ( [0] => wp_postmeta [1] => mt1 ) [clauses:protected] => Array ( [wp_postmeta] => Array ( [key] => mkb_tax_order_5747 [compare] => EXISTS [compare_key] => = [alias] => wp_postmeta [cast] => CHAR ) [mt1] => Array ( [key] => mkb_tax_order_5747 [compare] => NOT EXISTS [compare_key] => = [alias] => mt1 [cast] => CHAR ) ) [has_or_relation:protected] => 1 ) [date_query] => [queried_object] => WP_Term Object ( [term_id] => 5747 [name] => Wiring Diagrams [slug] => wiring-diagrams-chimecom-series [term_group] => 0 [term_taxonomy_id] => 5747 [taxonomy] => kbtopic [description] => [parent] => 5746 [count] => 2 [filter] => raw [term_order] => 5 ) [queried_object_id] => 5747 [request] => SELECT SQL_CALC_FOUND_ROWS wp_posts.ID FROM wp_posts LEFT JOIN wp_term_relationships ON (wp_posts.ID = wp_term_relationships.object_id) LEFT JOIN wp_postmeta ON ( wp_posts.ID = wp_postmeta.post_id ) LEFT JOIN wp_postmeta AS mt1 ON ( wp_posts.ID = mt1.post_id AND mt1.meta_key = 'mkb_tax_order_5747' ) WHERE 1=1 AND wp_posts.ID NOT IN (36862) AND ( wp_term_relationships.term_taxonomy_id IN (5747) ) AND ( wp_postmeta.meta_key = 'mkb_tax_order_5747' OR mt1.post_id IS NULL ) AND ((wp_posts.post_type = 'kb' AND (wp_posts.post_status = 'publish' OR wp_posts.post_status = 'acf-disabled'))) GROUP BY wp_posts.ID ORDER BY wp_postmeta.meta_value+0 ASC, wp_posts.menu_order ASC LIMIT 0, 4 [posts] => Array ( [0] => WP_Post Object ( [ID] => 37169 [post_author] => 18 [post_date] => 2021-08-15 20:57:06 [post_date_gmt] => 2021-08-16 03:57:06 [post_content] =>

Modification

Adding another C-ML/A to an existing or new system.  

Difficulty Level

2 - Easy/moderate - Component connection to external points.  

Components Required

  1. DAK-2S: Dual master adapter kit
  2. Power: Each master requires its own power supply or 4 "C" sized batteries.

Instructions

  1. Install components as shown on the diagram.
  2. Only one master can be used at a time. A squelch tone will be heard if both master stations are on and the TALK button is pressed at either one.
  3. Sub station will call both masters simultaneously and either master can answer the calling station.
Diagram
    [mkb-info]Install the bare wire end of each component module in the DAK-2S to the "1" terminal of each C-ML/A master station.[/mkb-info] [mkb-warning]Answer the call at ONE MASTER only. If the TALK button is pressed at both masters, activating the timing circuit on both, a loud squelch will be heard. Wait 15 seconds until the timing circuit resets before pressing TALK button again.[/mkb-warning] [post_title] => Two C-ML/A Master Stations With One Door Station [post_excerpt] => [post_status] => publish [comment_status] => open [ping_status] => open [post_password] => [post_name] => two-c-ml-a-master-stations-with-one-door-station [to_ping] => [pinged] => [post_modified] => 2025-03-13 10:26:22 [post_modified_gmt] => 2025-03-13 17:26:22 [post_content_filtered] => [post_parent] => 0 [guid] => https://aiphone.local/kb/two-c-ml-a-master-stations-with-one-door-station/ [menu_order] => 0 [post_type] => kb [post_mime_type] => [comment_count] => 0 [filter] => raw ) ) [post_count] => 1 [current_post] => -1 [before_loop] => 1 [in_the_loop] => [post] => WP_Post Object ( [ID] => 37169 [post_author] => 18 [post_date] => 2021-08-15 20:57:06 [post_date_gmt] => 2021-08-16 03:57:06 [post_content] =>

Modification

Adding another C-ML/A to an existing or new system.  

Difficulty Level

2 - Easy/moderate - Component connection to external points.  

Components Required

  1. DAK-2S: Dual master adapter kit
  2. Power: Each master requires its own power supply or 4 "C" sized batteries.

Instructions

  1. Install components as shown on the diagram.
  2. Only one master can be used at a time. A squelch tone will be heard if both master stations are on and the TALK button is pressed at either one.
  3. Sub station will call both masters simultaneously and either master can answer the calling station.
Diagram
    [mkb-info]Install the bare wire end of each component module in the DAK-2S to the "1" terminal of each C-ML/A master station.[/mkb-info] [mkb-warning]Answer the call at ONE MASTER only. If the TALK button is pressed at both masters, activating the timing circuit on both, a loud squelch will be heard. Wait 15 seconds until the timing circuit resets before pressing TALK button again.[/mkb-warning] [post_title] => Two C-ML/A Master Stations With One Door Station [post_excerpt] => [post_status] => publish [comment_status] => open [ping_status] => open [post_password] => [post_name] => two-c-ml-a-master-stations-with-one-door-station [to_ping] => [pinged] => [post_modified] => 2025-03-13 10:26:22 [post_modified_gmt] => 2025-03-13 17:26:22 [post_content_filtered] => [post_parent] => 0 [guid] => https://aiphone.local/kb/two-c-ml-a-master-stations-with-one-door-station/ [menu_order] => 0 [post_type] => kb [post_mime_type] => [comment_count] => 0 [filter] => raw ) [comment_count] => 0 [current_comment] => -1 [found_posts] => 1 [max_num_pages] => 1 [max_num_comment_pages] => 0 [is_single] => [is_preview] => [is_page] => [is_archive] => 1 [is_date] => [is_year] => [is_month] => [is_day] => [is_time] => [is_author] => [is_category] => [is_tag] => [is_tax] => 1 [is_search] => [is_feed] => [is_comment_feed] => [is_trackback] => [is_home] => [is_privacy_policy] => [is_404] => [is_embed] => [is_paged] => [is_admin] => [is_attachment] => [is_singular] => [is_robots] => [is_favicon] => [is_posts_page] => [is_post_type_archive] => 1 [query_vars_hash:WP_Query:private] => edf1c5fb7d6cc23de04fafa641e08a02 [query_vars_changed:WP_Query:private] => 1 [thumbnails_cached] => [allow_query_attachment_by_filename:protected] => [stopwords:WP_Query:private] => [compat_fields:WP_Query:private] => Array ( [0] => query_vars_hash [1] => query_vars_changed ) [compat_methods:WP_Query:private] => Array ( [0] => init_query_flags [1] => parse_tax_query ) )

External Signaling using the C-123L/A or C-123LW

Summary

Wiring diagram of external signaling in conjunction with the C-123L/A or C-123LW. This can be used to trigger a bell, buzzer, sounder or anything that requires a contact closure when a call is placed from the door station.

 

Solution

Transform Your Security Today

Connect with our local experts for product questions, demos, and assistance in designing your ideal security solution.

Contact Us